Christie Mirage WU12K-M
3DLP WUXGA 3D 10,500 Lumen Digital Projector
Get a Quote!
Innovation in High Performance 3D Projection
With WUXGA resolution and Dual Input 3D offering up to 120Hz native performance, the Christie Mirage WU12K-M is a truly innovative high performance 3D projector.
The Christie Mirage WU12K-M delivers more pixels, and more performance for visually stunning 3D for home theatre and entertainment, museums and education, scientific research, manufacturing, oil and gas exploration and anything in between. Offering complete compatibility with today’s 3D home entertainment requirements, the Christie Mirage WU12K-M is ready for Blu-ray 3D video, PS3 and other gaming consoles and meets the mandatory 3D spec for HDMI v1.4a.
With dual image processing capabilities, there are three modes of 3D input - native 3D input, frame doubled 3D and Dual Input 3D for maximum source compatibility and high-performance flicker-free operation without the need of a passive to active converter.
The Christie Mirage WU12K-M features 10,500 ANSI lumens, WUXGA resolution and up to 10,000:1 contrast. Combined with embedded Christie Twist™, additional standard features and ruggedized options, an expanded lens suite and industry-leading Christie warranties, service and support, the Christie Mirage M Series provides high-performance and ease of use for high-performance 3D users.
When you want high-performance 3D displays, think Christie Mirage M Series. The most compact 3DLP active stereo projector in its class, the series of 6 models deliver crisp, detailed images with excellent color and brightness.
- WUXGA resolution (1920 x 1200)
- Up to 10,500 ANSI lumens
- Up to a full 120Hz native frame rate
- Standard full 330MHz dual-link DVI-D
- Variable contrast ratio using electronically adjustable iris for crisp, detailed images - 2500-10,000:1 (full on, full off) / 650:1 ANSI
- At maximum brightness the projector draws a maximum power of 1320W
- Smallest chasis in its class
- Motorized yellow notch filter
- Dual Osram PviP lamps (350W)
- Embedded Christie Twist image warping and edge-blending
- Dust-sealed engine, filter-free design
- Intelligent Lens System (ILS) for zoom, focus, horizontal and vertical offset
- AutoDesk Revit model
- Built-in portrait display capabilities*
*Christie M Series stacking frame is required in portrait orientation.
3-chip DLP Projection
Christie delivers stunning, long-lasting image quality with unsurpassed DLP technology for a large array of high-performance, high resolution projection and display applications. With better color control, Christie delivers a smoother, cleaner, seamless digital picture.
Advanced color matching from simple to complex arrays, regardless of the level of experience. Christie Advanced Color is a user-assisted tool that enables advanced color matching from simple to complex arrays, regardless of the level of experience. Using a precision light meter, computer and software with a simple user interface, the operator is automatically guided to point the meter at the screen and data is fed into the computer. The computer performs the calculations and places the color mapping information on the projectors – that information stays on the projector until you choose to re-tweak the system.
Christie ArrayLOC manages the brightness and color levels of all projectors within an array to a common level, in real-time with no additional latency. Synchronized color and brightness level balancing self-adjusts in as little as two seconds, reducing the amount of time, labor and costs associated with maintaining a simulation display.
Christie AutoCal calibrates any arrayed projection display, from flat to cylindrical to spherical, and adjusts it to its optimized viewing configuration. With expert image display adjustment capabilities at your fingertips, a stabilized, consistent display with reduced system maintenance and downtime will achieve increased productivity.
With the expertise of Christie AutoCal, arrayed projection displays are easily configured and maintained.
An easy-to-use option to manage arrayed projectors, Christie Twist allows pixels to be mapped to any projection surface with proper geometry and perfect pixel-to-pixel alignment. Christie Twist provides the enhanced warping and expert blending required for arrayed projectors to operate as a single, uniform display.
Christie Twist offers enhanced warping and blending for exact geometric mapping regardless of the shape or surface.
Christie's MotoBlend solution maximizes system contrast and optimizes dark scene applications. Developed around Christie's extensive experience with dynamic content utilized in today's advanced visualization displays, Christie's motorized optical blending helps maximize the best of both worlds when it comes to life-like images and DLP based displays and environments – system contrast and optimized dark scene applications.
Developed using our extensive experience with dynamic content, Christie MotoBlend provides motorized
optical blending that maximizes system contrast and optimizes dark scene applications.
Developed specifically to address the simulation market, Christie AccuFrame enables the customer to reduce perceptible image smearing due to image retention and eye motion. Fully adjustable to support various frame rates and environments, the unique advanced electronics in all Matrix Series projectors come standard with AccuFrame to accurately display high speed simulation content for the most true-to-life displays.
Active and Passive Stereoscopic Displays
3D content is supported in three different modes of 3D input: Dual Input 3D, full frame rate 3D input1 and frame doubled 3D for maximum source compatibility and high-performance, flicker-free operation without a passive to active converter.
- Mode 1: Full frame rate 3D input – Native frame rate in/native frame rate out
- Mode 2: Dual input 3D – Two frame-locked inputs (one input for the left eye and the other for the right eye), that are combined (interleaved) in the projector @ 120Hz output
- Mode 3: Frame doubling – The projector will accept 60Hz progressive scan content (30Hz per eye) and will show each pair of frames twice
Exceptional 3D Image Quality:
Innovative High Performance 3D
Whether using active or passive display technology, the Christie Mirage M Series is easy to setup and configure. The most compact 3-chip DLP active stereo projectors in their class, the Christie Mirage M Series delivers visually stunning 3D for boardrooms, home theater, museums, education, scientific research, virtual prototyping, oil and gas exploration and anything in between.
Offering complete compatibility with today's 3D home entertainment requirements, the Christie Mirage M Series is ready for Blu-ray 3D video, PS3 and other gaming consoles and meets the mandatory 3D spec for HDMI v1.4a. To ensure your 3D solution is complete, Christie also offers a range of accessories that include: 3D glasses (active and passive), emitters and modulators.
Powered by dual image processing, the Christie Mirage M Series displays full resolution at a native frame rate up to 120Hz. Two standard Dual-link DVI input cards support 330 MHz bandwidth for full resolution Dual Input 3D.
For the ultimate home theater including Blu-ray 3D video content, the Christie Mirage M Series uses triple flash to provide the best images possible, no matter how fast motion your content might be. You can count on Christie to ensure the highest image quality and a comfortable theaterlike viewing experience.
Active Stereoscopic Viewing
Active stereoscopic displays provide the best 3D imagery available today. Active stereo is typically used for applications where vivid color reproduction and finite detail are required for precise content in key decision making applications. Offering the most detailed and lifelike 3D images, the Christie Mirage M Series supports full resolution at 330 MHz and can be used with Christie Mirage 3D active stereoscopic accessories, including an emitter and LCD shutter glasses.
Active Stereoscopic Viewing – Multiple Projectors
For applications that require a larger display for 1:1 scale visuals, you can use multiple Christie Mirage M Series projectors blended into a single, larger display.
Active Single Projector Versus Stacked Dual Projectors
Single, active 3D projection eliminates the need to stack, align and color match projectors and continually monitor and match brightness of two projectors for consistent left eye/right eye display. Typically for comparable brightness, single active 3D projection will operate with less noise, heat, physical space requirements and consumables along with fewer failure points and overall lower power consumption.
Passive Stereoscopic Viewing
When it comes to 3D for a larger crowd, passive stereoscopic displays offer the best return on investment. Using low-cost polarized glasses that can be given away or recycled after a single use, a passive stereo display is a cost effective way to deliver quality 3D images. Combine a silver screen and Christie Mirage M Series projectors with Christie Mirage 3D accessories, including our passive modulator and circular polarized 3D glasses, and you can bring incredible eye-popping 3D to even the largest of audiences!
|Christie Mirage WU12K-M (118-055101-02)|
|Uniformity||80% brightness uniformity|
|Type||3-chip 0.95" DMD|
|Native Resolution||WUXGA (1920 x 1200)|
|Frame Delay||As low as one frame|
|Type||Dual 350W P-VIP Osram|
|Pixel Clock||330 MHz|
|Inputs/Outputs, Control and Networking|
|Offsets1||All lenses ±112% Vertical ±42% Horizontal except those noted below
* 0.69:1 fixed lens ±22%V ±6%H ** 1.16-1.49:1 zoom lens ±82%V ±38%H
|Enhanced Feature Sets2||
|Operating Voltage||100-240 VAC 50/60Hz|
|Size (LxWxH)||22.1 x 19.7 x 10.2" (561 x 500 x 259mm)|
|Shipping Size (LxWxH)||29.0 x 27.0 x 24.6" (735 x 685 x 625mm)|
|Weight||55lbs (25kg) (without lens)|
|Shipping Weight||80lbs (36kg)|
1 Values are for reference and should be validated with the Christie lens calculator.
2 Some features may not be functional on initial product shipments but will be enabled via software upgrade when available.
Get a Quote!