Call a Specialist Today! 800-886-5369

Christie Mirage WU-L
1DLP WUXGA 600 Lumen 3D Projector

Christie Mirage WU-L

Christie Projectors
Christie Mirage WU-L Projectors
Christie Mirage WU-L 1DLP WUXGA 600 Lumen 3D Projector
#125-005106-01
Contact us for pricing!

Click here to jump to more pricing!

Overview:

LED DLP reliability with high performance 2D/3D flexibility

The 1DLP with RGB LED is the first Mirage Series projector to use solid-state LED illumination, providing precise, lifelike, vibrant colors and consistent performance over an estimated 60,000-hours (approximately 6.5 years) life cycle.

The Christie Mirage WU-L DLP projector offers high resolution, high pixel density, high reliability and continuous system calibration for a cost-effective 2D/3D capable, flexible visualization solution.

With WUXGA resolution, this small footprint projection system offers dual input 3D mode for passive to active conversion that provides the highest performance 3D video content at 120Hz. The Christie Mirage WU-L delivers visually stunning 3D for entertainment, museums and education, scientific research, manufacturing, oil and gas exploration, stereo simulation training and anything in between.

LED illumination provides precise, life-like vibrant colors, no color wheel artefacts and reliable performance for years of virtually maintenance-free display. And, with no restrictions for positioning, you get greater installation flexibility. Optional lenses, embedded Christie TwistII, any orientation projector placement and industry-leading Christie warranties, service and support the Christie Mirage WU-L is the perfect blend of high-performance and ease of use for 3D users.

Features

  • LED illumination with 60,000 hrs MTBF
  • Native WUXGA 1920 x 1200 resolution
  • 1DLP with solid state illumination engine (no color wheel) and sealed optics
  • Embedded warp and blending capabilities
  • Built-in passive to active converter
  • Unlimited mounting options
  • Dust-sealed light engine
  • Embedded Christie ArrayLOC color and brightness control
Two standard Dual link DVI-D (330 MHz) input cards, each with a VGA (165 MHz) port. High resolution, high pixel density and high reliability in a small, low power cost-effective form factor.
Optional purpose-built Rugged Motion Platform user kit available. No lamps mean no restrictions in orientation and increased installation flexibility.
Two standard Dual link DVI-D (330 MHz) input cards, each with a VGA (165 MHz) port. High resolution, high pixel density and high reliability in a small, low power cost-effective form factor. Optional purpose-built Rugged Motion Platform user kit available. No lamps mean no restrictions in orientation and increased installation flexibility.

Fetaures:

1-chip DLP LED Illumination

With Christie's single chip DLP LED illumination platform, we provide high resolution, pixel density and reliability, and continuous system calibration in a costeffective flexible platform that offers 2D/3D capability or, NVG stimulation. Utilizing solid-state LED illumination, provides precise, lifelike, vibrant colors and consistent performance over its lifecycle.

Advanced Color

Advanced color matching from simple to complex arrays, regardless of the level of experience. Christie Advanced Color is a user-assisted tool that enables advanced color matching from simple to complex arrays, regardless of the level of experience. Using a precision light meter, computer and software with a simple user interface, the operator is automatically guided to point the meter at the screen and data is fed into the computer. The computer performs the calculations and places the color mapping information on the projectors – that information stays on the projector until you choose to re-tweak the system.

Advanced Color

Christie ArrayLOC

Christie ArrayLOC manages the brightness and color levels of all projectors within an array to a common level, in real-time with no additional latency. Synchronized color and brightness level balancing self-adjusts in as little as two seconds, reducing the amount of time, labor and costs associated with maintaining a simulation display.

Christie AutoCal

Christie AutoCal calibrates any arrayed projection display, from flat to cylindrical to spherical, and adjusts it to its optimized viewing configuration. With expert image display adjustment capabilities at your fingertips, a stabilized, consistent display with reduced system maintenance and downtime will achieve increased productivity.

With the expertise of Christie AutoCal, arrayed projection displays are easily configured and maintained.
With the expertise of Christie AutoCal, arrayed projection displays are easily configured and maintained.

Christie Twist

An easy-to-use option to manage arrayed projectors, Christie Twist allows pixels to be mapped to any projection surface with proper geometry and perfect pixel-to-pixel alignment. Christie Twist provides the enhanced warping and expert blending required for arrayed projectors to operate as a single, uniform display.

Christie Twist offers enhanced warping and blending for exact geometric mapping regardless of the shape or surface.
Christie Twist offers enhanced warping and blending for exact geometric mapping regardless of the shape or surface.

Christie MotoBlend

Christie's MotoBlend solution maximizes system contrast and optimizes dark scene applications. Developed around Christie's extensive experience with dynamic content utilized in today's advanced visualization displays, Christie's motorized optical blending helps maximize the best of both worlds when it comes to life-like images and DLP based displays and environments – system contrast and optimized dark scene applications.

Christie MotoBlend
Developed using our extensive experience with dynamic content, Christie MotoBlend provides motorized
optical blending that maximizes system contrast and optimizes dark scene applications.

Christie AccuFrame

Developed specifically to address the simulation market, Christie AccuFrame enables the customer to reduce perceptible image smearing due to image retention and eye motion. Fully adjustable to support various frame rates and environments, the unique advanced electronics in all Matrix Series projectors come standard with AccuFrame to accurately display high speed simulation content for the most true-to-life displays.

With/Without Christie AccuFrame

Christie 3DActive and Passive Stereoscopic Displays

3D content is supported in three different modes of 3D input: Dual Input 3D, full frame rate 3D input1 and frame doubled 3D for maximum source compatibility and high-performance, flicker-free operation without a passive to active converter.

  • Mode 1: Full frame rate 3D input – Native frame rate in/native frame rate out
  • Mode 2: Dual input 3D – Two frame-locked inputs (one input for the left eye and the other for the right eye), that are combined (interleaved) in the projector @ 120Hz output
  • Mode 3: Frame doubling – The projector will accept 60Hz progressive scan content (30Hz per eye) and will show each pair of frames twice

Active and Passive Stereoscopic Displays

Specifications:


Christie Mirage WU-L (125-005106-01)
Image
Brightness 600 lumens ANSI ±10% (rated at 75-80% EBU depending on the lens)
Contrast 10,000:1 dynamic; 1,400:1 FOFO; 450:1 ANSI
Uniformity 95% brightness and color uniformity after electronic adjustment
Display Technology
Type Revolutionary solid state projector using a single TI Darkchip 3 with a solid state illumination engine (no color wheel) and sealed optics
Native Resolution Native 1920 x 1200 (16:10 aspect ratio) WUXGA
Illumination
Type RGB LED illumination
Estimated Life MTBF of 60,000 hrs on illumination package
Input
Signals
  • Native Dual link DVI-D
  • Dual Input 3D provides up to 120Hz native frame rate from two frame-locked channels1
  • Frame-doubled 3D – Dual link DVI, VGA (HDMI, Analog BNC and SDI optional)
Pixel Clock 330 MHz
Scan Rates Horizontal: 15-120kHz
Vertical: 23.97-150Hz (up to 120Hz maximum output)2
Inputs/Outputs, Control and Networking
Inputs
  • RS-232 in/out
  • RS-422 in
  • Ethernet (10/100)
  • USB device
  • GPIO (RS232 9-pin male connector)
  • Dual 7-segment status display
  • Remote control (with optional wired XLR connection)
  • Slot 1-2 standard (populated): two Dual link DVI-D (330 MHz) and VGA (165 MHz)
Optional Input Modules
  • Two standard Dual link DVI input cards (330 MHz), VGA (165 MHz)
  • Full bandwidth Analog BNC
  • Slots 2-4 unpopulated
  • Dual SD/HD-SDI
  • Video Decoder3
  • Twin HDMI
Lenses4
Lens Mount
  • Motorized horizontal and vertical lens offset
  • No shutter required
  • No iris required – user programmable illumination parameters (eliminates the need for a mechanical shutter)
Fixed
  • 0.64:1 WUXGA lens
  • 0.75:1 WUXGA lens
Zoom 1.2-1.6:1 WUXGA lens
Offsets5
  • 0.64:1 WU (±5% V/±5%H)
  • 0.75:1 (±100% V/±80%H)
  • 1.2-1.6:1 (±100% V/±80%H)
Accessories
Standard Accessories
  • IR remote
  • Line cord
  • Two Dual link DVI-D cards
  • 3D sync cable
Optional Accessories
  • Analog RGBHV BNC input card for analog sources greater than 165 MHz
  • Dual link DVI input card
  • Dual HD-SDI input card
  • Twin HDMI input card
  • User kit (includes manual, IR remote and hard wired cable for the remote)
  • Rugged Motion Platform user kit available
Features
Enhanced Feature Sets
  • Minimum Processing Latency (MPL™)
  • Christie Twist™ II – advanced warping/edgeblending hardware technology integrated directly into the projector, includes warping/ blending software
  • Auto setup, power up
  • Menus in eight languages
  • Multiple channel memories (for recall memory storage)
  • Christie ArrayLOC™ – automatic, continuous management of brightness and color space levels of all projectors in an array to a common level, in real-time
Power Requirements
Operating Voltage 100-240 VAC @ 50/60Hz
Operating Current 5.3A
Power Consumption 400W maximum (variable, dependant on content)
Dissipation 1364 BTU/hr (variable, dependant on content)
Physical
Size
  • Projector head module + light module (no lens) (LxWxH): 8.7 x 18.4 x 11.0" (220 x 467 x 287mm)
  • Electronics module (LxWxH): 16.5 x 5.5 x 6.7" (420 x 140 x 170mm)
Weight
  • Projector head module + light module (no lens): 32lbs (14.6kg)
  • Electronics module: 9.7lbs (4.4kg)
Shipping Weight 52lbs (23.6kg)
Environment
Noise 38dBA at 25°C ambient temperature (without electronics module)
Temperature 40-95°F (5-35°C)
Humidity 20-80% non-condensing
Others
Regulatory Approvals
  • Directives (EC) 2011/65/EU (RoHS)
  • 2012/19/EU (WEEE)
  • Regulation (EC) No. 1907/2006 (REACH)
  • CAN/CSA C22.2 No. 60950-1
  • UL 60950-1
  • IEC 60950-1
  • FCC, Part 15, Subpart B, Class A
  • EN55022/CISPR22 Class A
  • EN55024/CISPR24
  • Certifications marks (check with Christie for latest update): cULus (Canada & US), CE (EU), CCC (China), GoST-R (Russia), KC/KCC (Korea), PSE (Japan), C-Tick (Australia & New Zealand)
Warranty
  • Three years parts and labor (excluding illumination module)
  • Contact an authorized Christie representative for full details of our limited warranty

1 Requires purchase of at least one optional input module.
2 Maximum refresh rate is 120Hz.
3 Each offset is specified with the other at zero. Simultaneous horizontal and vertical offsets may limit the adjustment range of each.
4 All lenses are optional.
5 When mounted in landscape orientation.

Views:


Front Small Lens

High Left Small Lens High Right Small Lens High Right Upright Small Lens Low Left Small Lens
Low Left Upright Small Lens

Low Right Small Lens Front Large Lens High Left Large Lens High Right Large Lens
High Right Upright Large Lens

Low Left Large Lens High Left Upright Large Lens Low Left Upright Large Lens 6-axis Mount
High Left Back 6-axis Mount Rugged Kit High Right Power Supply High Left Rugged Kit High Right Battery  

 

Christie Projectors
Christie Mirage WU-L Projectors
Christie Mirage WU-L 1DLP WUXGA 600 Lumen 3D Projector
#125-005106-01
Contact us for pricing!